Power profiling¶

This article covers important background information about power profiling, with an emphasis on Intel processors used in desktop and laptop machines. It serves as a starting point for anybody doing power profiling for the first time.

Basic physics concepts¶

In physics, power is the rate of doing work. It is equivalent to an amount of energy{.mw-redirect} consumed per unit time. In SI units, energy is measured in Joules, and power is measured in Watts, which is equivalent to Joules per second.

Although power is an instantaneous concept, in practice measurements of it are determined in a non-instantaneous fashion, i.e. by dividing an energy amount by a non-infinitesimal time period. Strictly speaking, such a computation gives the average power but this is often referred to as just the power when context makes it clear.

In the context of computing, a fully-charged mobile device battery (as found in a laptop or smartphone) holds a certain amount of energy, and the speed at which that stored energy is depleted depends on the power consumption of the mobile device. That in turn depends on the software running on the device. Web browsers are popular applications and can be power-intensive, and therefore can significantly affect battery life. As a result, it is worth optimizing (i.e. reducing) the power consumption caused by Firefox and Firefox OS.

Intel processor basics¶

Processor layout¶

The following diagram (from the Intel Power Governor documentation) shows how machines using recent Intel processors are constructed.

The important points are as follows.

The processor has one or more packages. These are part of the actual processor that you buy from Intel. Client processors (e.g. Core i3/i5/i7) have one package. Server processors (e.g. Xeon) typically have two or more packages.
Each package contains multiple cores.
Each core typically has hyper-threading, which means it contains two logical CPUs.
The part of the package outside the cores is called the uncore or system agent. It includes various components including the L3 cache, memory controller, and, for processors that have one, the integrated GPU.
RAM is separate from the processor.

C-states¶

Intel processors have aggressive power-saving features. The first is the ability to switch frequently (thousands of times per second) between active and idle states, and there are actually several different kinds of idle states. These different states are called C-states. C0 is the active/busy state, where instructions are being executed. The other states have higher numbers and reflect increasing deeper idle states. The deeper an idle state is, the less power it uses, but the longer it takes to wake up from.

Note: the ACPI standard specifies four states, C0, C1, C2 and C3. Intel maps these to processor-specific states such as C0, C1, C2, C6 and C7. and many tools report C-states using the latter names. The exact relationship is confusing, and chapter 13 of the Intel optimization manual has more details. The important thing is that C0 is always the active state, and for the idle states a higher number always means less power consumption.

The other thing to note about C-states is that they apply both to cores and the entire package — i.e. if all cores are idle then the entire package can also become idle, which reduces power consumption even further.

The fraction of time that a package or core spends in an idle C-state is called the C-state residency. This is a misleading term — the active state, C0, is also a C-state — but one that is nonetheless common.

Intel processors have model-specific registers (MSRs) containing measurements of how much time is spent in different C-states, and tools such as powermetrics (Mac), powertop and turbostat (Linux) can expose this information.

A wakeup occurs when a core or package transitions from an idle state to the active state. This happens when the OS schedules a process to run due to some kind of event. Common causes of wakeups include scheduled timers going off and blocked I/O system calls receiving data. Maintaining C-state residency is crucial to keep power consumption low, and so reducing wakeup frequency is one of the best ways to reduce power consumption.

One consequence of the existence of C-states is that observations made during power profiling — even more than with other kinds of profiling — can disturb what is being observed. For example, the Gecko Profiler takes samples at 1000Hz using a timer. Each of these samples can trigger a wakeup, which consumes power and obscures Firefox’s natural wakeup patterns. For this reason, integrating power measurements into the Gecko Profiler is unlikely to be useful, and other power profiling tools typically use much lower sampling rates (e.g. 1Hz.)

P-states¶

Intel processors also support multiple P-states. P0 is the state where the processor is operating at maximum frequency and voltage, and higher-numbered P-states operate at a lower frequency and voltage to reduce power consumption. Processors can have dozens of P-states, but the transitions are controlled by the hardware and OS and so P-states are of less interest to application developers than C-states.

Power and power-related measurements¶

There are several kinds of power and power-related measurements. Some are global (whole-system) and some are per-process. The following sections list them from best to worst.

Power measurements¶

The best measurements are measured in joules and/or watts, and are taken by measuring the actual hardware in some fashion. These are global (whole-system) measurements that are affected by running programs but also by other things such as (for laptops) how bright the monitor backlight is.

Devices such as ammeters give the best results, but these can be expensive and difficult to set up.
A cruder technique that works with mobile machines and devices is to run a program for a long time and simply time how long it takes for the battery to drain. The long measurement times required are a disadvantage, though.

Power estimates¶

The next best measurements come from recent (Sandy Bridge and later) Intel processors that implement the RAPL (Running Average Power Limit) interface that provides MSRs containing energy consumption estimates for up to four power planes or domains of a machine, as seen in the diagram above.

PKG: The entire package.
- PP0: The cores.
- PP1: An uncore device, usually the GPU (not available on all processor models.)
DRAM: main memory (not available on all processor models.)

The following relationship holds: PP0 + PP1 <= PKG. DRAM is independent of the other three domains.

These values are computed using a power model that uses processor-internal counts as inputs, and they have been verified as being fairly accurate. They are also updated frequently, at approximately 1,000 Hz, though the variability in their update latency means that they are probably only accurate at lower frequencies, e.g. up to 20 Hz or so. See section 14.9 of Volume 3 of the Intel Software Developer’s Manual for more details about RAPL.

Tools that can take RAPL readings include the following.

tools/power/rapl: all planes; Linux and Mac.
Intel Power Gadget: PKG and PP0 planes; Windows, Mac and Linux.
powermetrics: PKG plane; Mac.
perf: all planes; Linux.
turbostat: PKG, PP0 and PP1 planes; Linux.

Of these, tools/power/rapl is generally the easiest and best to use because it reads all power planes, it’s a command line utility, and it doesn’t measure anything else.

Proxy measurements¶

The next best measurements are proxy measurements, i.e. measurements of things that affect power consumption such as CPU activity, GPU activity, wakeup frequency, C-state residency, disk activity, and network activity. Some of these are measured on a global basis, and some can be measured on a per-process basis. Some can also be measured via instrumentation within Firefox itself.

The correlation between each proxy measure and power consumption is hard to know and can vary greatly. When used carefully, however, they can still be useful. This is because they can often be measured in a more fine-grained fashion than power measurements and estimates, which is vital for gaining insight into how a program can reduce power consumption.

Most profiling tools provide at least some proxy measurements.

Hybrid proxy measurements¶

These are combinations of proxy measurements. The combinations are semi-arbitrary, they amplify the unreliability of proxy measurements, and unlike non-hybrid proxy measurements, they don’t have a clear physical meaning. Avoid them.

The most notable example of a hybrid proxy measurement is the [“Energy Impact” used by OS X’s Activity Monitor.

Power profiling how-to¶

This section aims to put together all the above information and provide a set of strategies for finding, diagnosing and fixing cases of high power consumption.

First of all, all measurements are best done on a quiet machine that is running little other than the program of interest. Global measurements in particular can be completely skewed and unreliable if this is not the case.
Find or confirm a test case where Firefox’s power consumption is high. “High” can most easily be gauged by comparing against other browsers. Use power measurements or estimates (e.g. via tools/power/rapl, or mach power on Mac, or Intel Power Gadget on Windows) for the comparisons. Avoid lower-quality measurements, especially Activity Monitor’s “Energy Impact”.
Try using differential profiling to narrow down the cause.
- Try turning hardware acceleration on or off; e10s on or off; Flash on or off.
- Try putting the relevant tab in the foreground vs. in the background.
- If the problem manifests on a particular website, try saving a local copy of the site and then manually removing HTML elements to see if a particular page feature is causing the problem
Many power problems are caused by either high CPU usage or high wakeup frequency. Use one of the low-context tools to determine if this is the case (e.g. on Mac use powermetrics.) If so, follow that up by using a tool that gives high-context measurements, which hopefully will identify the cause of the problem.
- For high CPU usage, many profilers can be used: Firefox’s dev tools profiler, the Gecko Profiler, or generic performance profilers.
- For high wakeup counts, use dtrace or perf or TimerFirings logging.
On Mac workloads that use graphics, Activity Monitor’s “Energy” tab can tell you if the high-performance GPU is being used, which uses more power than the integrated GPU.
If neither CPU usage nor wakeup frequency identifies the problem, more ingenuity may be needed. Looking at other measurements (C-state residency, GPU usage, etc.) may be helpful.
Animations are sometimes the cause of high power consumption. The animation inspector in the Firefox Devtools can identify them. Alternatively, here is an explanation of how one developer diagnosed two animation-related problems the hard way (which required genuine platform expertise).
The approximate cause of power problems often isn’t that hard to find. Fixing them is often the hard part. Good luck.
If you do fix a problem by improving a proxy measurement, you should verify that it also improves a power measurement or estimate. That way you know the fix had a genuine effect.